🙌 🙌
I made a couple of clickers in the shape of pig heads.
For reference, I am using an Outemu Blue mechanical switch (an inexpensive clone of the Cherry MX).
There is a hole on the top to use it as a keychain. I also made a...
2025-11-17 22:08:14 +0000 UTC View Post
A plaid napkin came to mind for the Printed Fabric contest.
It can be used as a coaster for a cold drink 🍺.
The base is a modernized version of the flexible brick I made earlier.
This model is inte...
Hi everyone!
For some time my 3D printer was broken 🖨️🔧, now it is back in service 🙌
Continuing the theme of flexible pencils, I made a few additions.
For printing, multi-color 3D printing will be needed, although it is possible to manage without it if you know how to change filament on time on a single-color 3d printer 😉.
🙌🙌
I wrote a message to some of you asking where you're from. Not everyone replied – maybe you're shy or didn't get the notification. I wanted to offer you a bit of FREE filament or resin 👌.
You can specify the color you want – PLA, PLA+, PLA High Speed, tricolor, rainbow, glowing, overclocked pastel, glowpocalypse, impossible candy 🥴 ... I can't even keep up with all these types anymore.
Maybe I un...
2025-10-12 23:14:34 +0000 UTC View Post
🙌🙌
Some time ago I made a fidget in the shape of a cassette. A subscriber reminded me about it on Discord. You could say the flexible pencil is a continuation of the cassette theme, the sketch was made a long time ago.
I've added a Discord server since the Patreon chat isn't the most convenient. Communication will be easier with you on Discord. You can post photos of your prints in #photos-videos or describe any difficulties with printing or design if they come up. You can also write there about anything related to accessing the database.
In short, don't hesitate to write!
2025-09-26 00:40:49 +0000 UTC View Post
I made improvements to the flexible vegetables. The changes affected all except the eggplant. The versions with eyes (let's call them "sweet" ☺️) are exclusive, available only here and on Boosty.
🥕 In order. I made the carrot with separate eyes to achieve universality; the eyes are common for the eggplant, carrot, and cucumber.
Hi everyone 🙌🙌
Continuing the Super Mario theme again, I changed the pencil holder.
Now it has a skull 💀 with a mustache, and the brick color hints at the Underground level .
For printing, as before, no ASM/ACE is needed; each part is single-colored and printed separately. Assembly is simple; everything is assembled using glue 💧
Hello everyone 🙃
Continuing the Super Mario theme, I made a pencil holder.
✏️🖋️🖊️🖌️🖍️
Btw, Super Mario Bros. 1985 will turn 40 in September; it was released in Japan on September 13, 1985. This character never gets old, he is always 25 years old, although technically Mario is now 69 years old, consider...
I'll take advantage of the pause that's conveniently provided here. I'll save you a small amount.
For more dynamic feedback, I created a Telegram channel, which is public.
There will also be a private Telegram channel for patrons.<...
Funny fidget toy in the form of the top part of a can.
The rotation angle of the ring is set optimally at just under 30 degrees. A 40-degree lift would look more natural, but there are limitations due to the stiffness of the switch spring. Technically, an intermediate element between the goose foot and the lever coming from the ring would make sense, but in practice, the mechanism works perfectly. The...
2025-08-14 14:11:28 +0000 UTC View Post
Flash design of a can holder in brutalist style.
Concrete, glass blocks, and rebar.
For handle.stl use supports when printing.
Use glue for assembly 💧
I made it for a specific diameter, in this case, the inner diameter is 63.67mm.
To fit your can, you can print the test model test.stl by setting the scaling factor in the sli...
This is a diorama design inspired by Super Mario Bros. 1985. This is my first trial experience. The diorama is quite simple, made in Fusion 360. The construction has no complex joints. Where possible, I made recesses, but overall, the assembly is of the "drop glue and stick it in the right place" type. If the walls have patterns - bricks, dirt - then I left the floors flat; the diagonal lines of the top layer look quite harmonious. I included the assembly sequence at ...
2025-08-06 14:33:04 +0000 UTC View Post
Hello everyone 🙌
this month I've been exploring AI-generated 3D models, but the results are still modest—the models require extensive post-processing in ZBrush. Specifically, I created a diorama in Fusion 360 inspired by the game Super Mario Bros. (1985). Initially, I planned to quickly generate four characters, but so far, I've only made Mario. I’ll share more details in my next post.
This post is dedicated to the 5th vegetable—this time, it’s corn. 2025-07-31 20:59:47 +0000 UTC View Post
The model I've wanted to make for a long time is a 58mm lens cap shaped like an Oreo cookie 🍪.
I once made a commemorative eclipse magnet in 2024. It wasn't by chance that ...
2025-07-05 14:55:54 +0000 UTC View Post
🙌🙌
I accidentally came across a pendant in the shape of a fish skeleton with a Cuban chain as its joints.
Inspired, I made a similar version ⛓️ for my original design [2025-06-30 15:25:27 +0000 UTC View Post
Hi there!
I made another flexible vegetable, this time it's a sad eggplant 🥺🍆.
There are 4 versions for printing: whole, in parts, with googly (wiggle) eyes, and just a faceless eggplant (I kept the hairstyle).
All parts print without supports ✅.
Assem...
2025-06-25 00:52:41 +0000 UTC View Post
Continuing the previous post
This charging stand for phones/headphones is designed as an Ionic column that has miraculously withstood the test of time. These columns are so indestructible, they've weathered the fall of Rome, endured through the Middle Ages, and even survived the extravagance of the Baroque era!
For patrons with access rights to the database
2025-06-16 22:39:42 +0000 UTC
View Post
Hello everyone 🙌🙌,
this is a candy dispenser design in the form of an ancient Greek Ionic column. I made the column a long time ago as a Fusion 360 training exercise. I adapted it for this design. It fits 7 standard-sized Chupa Chups lollipops.
🍭🍭🍭🍭🍭🍭🍭 There wasn't enough space for one more to make it a full byte 🥁
<...
2025-06-15 15:49:29 +0000 UTC View Post
First, not so much about a specific design, but about laser cutting in general.
❗ Note: what follows is a mix of theory and personal insights.
To jump straight to the design → scroll down. ⏩
Earlier, I was actively into laser cutting until I got a 3D printer. At that time, CO2 gas lasers were popular. I built my own laser cutter, with a working area of 900mm x 600mm and a power of 40W. The laser tube was chosen not base...
2025-06-13 23:29:23 +0000 UTC View Post
This is technically a poll, I just want to keep the topic discreet from other users.
I want to ask those who sell prints to add an authorized seller badge to their photos or description. You can add the badge to any convenient spot - on any product photo or in its desc...
2025-05-30 15:14:15 +0000 UTC View Post
Hi everyone 👋
I added versions with googly eyes for the pepper 🌶️, the carrot 🥕 and the cucumber 🥒
The other day I got an assortment of these eyes. They're not hard to find on marketplaces if you search for 'googly eyes' or 'wiggle eyes'. I had five sizes available (5, 7, 10, 12, and 15mm).
For my designs, the 7mm diameter works perfectly, but you can also use 5mm, 10mm or 12mm—just scale the design in the sl...
2025-05-30 14:41:18 +0000 UTC View Post
Hey!
Another flexible veggie.
This time it's a slightly angry chili pepper. I made each part separately for those who don't have the option to print everything at once using AMS. In this design, the stem is attached using glue.
The main color for it is, of course, red, but green and yellow ...
2025-05-25 11:58:53 +0000 UTC View Post
Hello everyone 👋,
This is a design I decided to keep exclusive for my patrons.
Three versions of the cucumber with different levels of 'drunkenness,' and one without eyes. By the way, googly eyes 👀 are a good alternative if you don’t have a multi-material (AMS) printer. I’ll make a compatible versi...
2025-05-17 13:47:23 +0000 UTC View Post
Hi everyone!
I think this was one of the first designs I made in Fusion 360. Feels like it was back in the Mesozoic era 🦖. It was easier to spend 10 minutes creating a new one than digging through the archive. As you can see, it’s a simple cylindrical rod with two different symbols 🟢❌ on its ends.
You can perform the following trick with this object: Place it on a flat, hard surface (carpet won’t work for this). Press down on one end of the rod to make it start rotatin...
2025-05-10 13:35:18 +0000 UTC View Post
The title speaks for itself 🔭🥕
I used my Collapsible Ice Cream Cone design as a basis.
This design does not require an AMS ✅
To keep the petals closed, I used cylindrical 5x2mm magnets 🧲, which are glued into matching recesses 💧.
2025-04-12 10:22:33 +0000 UTC
View Post
Hello everyone 👋
I made a flexible carrot with and without eyes 👀.
For the no-eyes version, no AMS is needed ✅
The carrot top prints separately. It has a small internal support — just remove it after printing and snap the top into the carrot.
This model is <...
2025-04-11 00:26:41 +0000 UTC View Post
🙌, I’m continuing the Easter theme!
Earlier, I made a lollipop case in Halloween and Super Mario styles—you can easily find these posts under the tag LOLIPOP . This time, it’s an egg 🥚!
Two versions available: one for the standard size and a mini version.
2025-03-30 00:36:29 +0000 UTC
View Post