Hii!! Happy first of the month!
I was recently advised by some of you that the hearts and the diamonds on the bolt Fidget twist nut weren't evenly spaced! I went in and readjusted both models to make sure that the hearts and diamonds were evenly spaced.
Neopyx3D Pushed another update for the Dragonfly and updated the Original design to make the thin area under the wings thicker.
I have updated these files in all of the archives, the monthly and in the patreon exclusive...
2023-08-01 17:10:45 +0000 UTC
View Post
Hii!!
Hope you guys are having a great weekend! This is your friendly reminder that another awesome cycle is ending! We are heading into a billing month and this means that you will be charged on August 1st!
This patreon has grown more than I could have ever imagined, and its all thanks to you guys and your amazing support! Thank you so much for another awesome cycle! I've already started work on new releases! yay!!
See you on the flip side!
<...
2023-07-30 02:53:12 +0000 UTC
View Post
Hii Happy Tuesday!
They are here!!
To grab your files you can click on the link below or hop over to the Patreon Exclusives Post:
Click here to teleport to the Patreon Exclusives post!
I have come together with James who runs bucklenshackle, he has created the beloved fidget bolt that some of you may have seen around! We came up with the fun idea to dress th...
2023-07-25 17:58:17 +0000 UTC
View Post
Hiii!!
I have been working on this Collab with James who runs bucklenshackle. Some of you may be familiar with his awesome bolt fidget, and we had the great idea of dressing them up a bit!
Im really stoked for this release! I have a bit more testing to do but they should be ready soon! yay!
See you guys soon!!
2023-07-21 20:58:44 +0000 UTC
View Post
Hii!!
Community mod release
Im excited to introduce the first ever community mod! this one is made by the talented Stefania!
It prints without supports! is super spacious and comes with a screw cap! I loved printing the piggy sculpt this big and having it serve a purpose!
Important: Please note that depanding on your printers tolerance you may have to size the cap accordingly. At 100% it can be a tight fit, so if you feel it is hard...
2023-07-19 20:03:07 +0000 UTC
View Post
hii!!
following the butt frogs I wanted to do a fun little hut for them to chill on! which also has a little compartment to keep things in!
The little one is 80% scale and that's how small I would go with it! It prints without supports!
a 60% butt frog the plain version should fit into a 100% hut
Also makes a cute dice holder!
To grab your files you can click on the link below or hop over to the Patreon Exclusives Post:
2023-07-16 18:29:22 +0000 UTC
View Post
Hiii!!
Hope you guys are having a good weekend! Just wanted to pop in here and let you know that Neopyx3D did an awesome update on the dragonfly!
Some of you have mentioned that there are thin areas just under the wing of the ball joint version which sometimes resulted in it breaking and the wings coming loose! The new update provides a thicker area that won’t be easily broken! It’s available for the remix version only!
This update should not be scaled down as that will ...
2023-07-15 19:01:04 +0000 UTC
View Post
Hii!! Happy Monday!
Its butt frog release day! yay!!
There are a bunch of versions because who wants just one butt frog? You'll find there are happy and frowny frogs, ive also included a keychain and a pot version
All versions print without supports!
Hope you guys enjoy them as much as I have! I'm working on some other fun things for this month so I'll see you guys soon!
These were publicly released models and are no longer available on patreon! You can p...
2023-07-11 02:30:18 +0000 UTC
View Post
Yay a new month!
To kick off the month I have been working on a fun butt frog pack! Because come on I think a Layersingreen butt frog is way overdue! Don't let them fool you with their blank stares, there is a lot of junk in that trunk!
Me and my butt frogs will see you soon!!
2023-07-08 03:37:03 +0000 UTC
View Post
Hii!! Happy Friday!!
This is a reminder that we are heading into a free month! This means that you will not be charged on July 1st! Yay!!
Hope you guys have a wonderful weekend!
2023-06-30 13:26:43 +0000 UTC
View Post
Hii!!
Here is some Information, and the new 2023 billing schedule
I run my patreon in cycles. Each cycle is 2 months long starting with a billing month followed by a free month. There are a few important points to consider:
- When Joining my patreon you will be charged the day you joined, regardless of where we are in the cycle
- The next time you are charged depends on when in the cycle you joined. If you join during a billing month y...
2023-06-29 23:09:50 +0000 UTC
View Post
Hii!! Happy Thursday!
This awesome collab is all thanks to Neopyx3D who generously allowed me to remix this model! It is so cool and I fell in love with it the moment I saw it!
In this pack you will find:
- Dragonfly Neopyx3D original
- Dragonfly Remix
- Dragonfly Remix pre-brimmed tabs
- Dragonfly Remix loop jointed wings
The pre-brimmed version has two little tabs on the ball joint which help make sure it stays in place! At my test team's request I ...
2023-06-29 18:24:02 +0000 UTC
View Post
Hii!! You guys though we were done for the month? SUPRISE! I have another amazing collab!!
Neopyx3D has allowed me to remix one of his amazing models and share it with you guys! Its such a fun model!
See you guys sooon!!!
2023-06-28 14:56:20 +0000 UTC
View Post
Hii!!
In this fun collab with Meliora3D we had created the melty ice-cream Narwhal! In this pack you will find:
- Ice-cream Narwhal
- Ice-cream Narwhal short version
- Ice-cream Narwhal keychain
The keychain version was a last minute addition with having it suggested in the sneak peek post, the suggestion was to put the hole through the cone which I loved, but unfortunately there isn't enough space there to fit an appropriate sized hole and keep durability of the...
2023-06-23 17:40:49 +0000 UTC
View Post
Hii!! Yaay its Friday!
Just wanted to pop in here and let you guys know that the summer Cults3D store sale is on now! if you were looking to grab some of the backlog this would be a good time to do it! The sale will go on till July 6th
Click here to teleport to cults3d store
Release coming later today stayed tuned!!!
2023-06-23 14:42:17 +0000 UTC
View Post
Hii!!
I have an exciting new collab with Meliora3D, I loved the narwhal he created and he had the awesome idea of creating a melty ice cream cone version! How cute!
I will see you guys very soon!!
2023-06-22 17:49:45 +0000 UTC
View Post
Hii!! Happy Tuesday!
I got some fun mini prints to wrap up Kosh's pack! this bonus release includes:
- Keychain
- Star magnet
- Leaf magnet
- Mushroom magnet
- Flower magnet
Although the keychain was tested down to a tiny 50% scale I don't recommend printing it smaller then 80% for best joint strength and articulation
The Magnets have two version one with precut holes for two 5x3 magnets, and a blank version that can be scaled to fit any size ma...
2023-06-20 23:40:59 +0000 UTC
View Post
Hii!! Happy Tuesday!
My first dice tower release! I wanted to keep it simple and as compact as possible for a quick print!
at 100% the tower will fit D20 dice, however there is some flexibility on scaling and it can be scaled up to fit larger dice! Prints without supports!
There are two dice perches as well, top of the tower, and the big mushroom!
I have one more Kosha release to wrap up the pack!
This model was a Publicly released model and is no l...
2023-06-13 18:52:24 +0000 UTC
View Post
hiii!!
Hope you guys are having a great weekend! I got a sneak peek for the upcoming dice tower release!
see you soon!!
2023-06-11 18:14:29 +0000 UTC
View Post
Hii!!
My test team had let me know there is a fuse on the “Kosha Short Wingless” File! It’s now fixed! Please make sure you redownload the file from the folder!
I hope this didn’t cause too much inconvenience!
Thank you!!
2023-06-06 19:34:30 +0000 UTC
View Post
Hii!! Happy Monday
I am happy to bring you Kosha's long version to break open Junes releases!
In this release you will get:
- Kosha Long version
- Kosha long version wingless
- Kosha Short version Wingless
- Kosha Long version 3MF
I love the long version and how she can twist herself all around and curl up into a ball!
The little one in the pictures is a long wingless printed at...
2023-06-05 16:53:18 +0000 UTC
View Post
Hii!!
It was brough to my attention that the released Kosha short version 3MF file contained a setting that should have been off! I since updated the file in the download folder so make sure you redownload it!
Thank you!!
2023-06-01 00:48:03 +0000 UTC
View Post
Hii!!
Another awesome month has come and went! This is your reminder that we are entering a new cycle and June 1st is a billing month, this means that you will be charged on June 1st!
Thank you to all the new comers and my loyal friends for another amazing month!
I will be uploading a new schedule for the bi monthly billing!
Hope to see you guys in June 🤍
2023-05-31 15:43:25 +0000 UTC
View Post
Hii!! Happy Monday!
Release day!! I felt bad and decided no more sneak peeks!
Meet Kosha! She is a mix between an axolotl and a dragon, and she's dressed in her best spring attire!
As I mentioned before she's part of a bigger pack ill be releasing in June! She has a long version and I am working on a Kosha themed dice tower along with a few other fun things! Super exciting!!
Kosha prints without supports and tested down to 80% with successful prints down to as small as...
2023-05-29 16:14:38 +0000 UTC
View Post
hiiii!!
Another sneak peek! This one comes with a hint!
Is it articulating?
Yes it is
comment your question for the next hint!!
2023-05-27 13:05:16 +0000 UTC
View Post
Hii!!
Okay, so I am really excited about this upcoming pack I have been working on!
It’s going to be a big one, as I am really liking the theme! This pack is still a work in progress, I have a several themed models I planned that I want to include in it, and once complete it is scheduled to release in June, but I pulled this upcoming release from the pack as I cannot wait until june to share it with you guys!
And since I cannot pass this opportunity to be a terror I am ...
2023-05-25 16:46:14 +0000 UTC
View Post
Hii!!
The wardens have been summoned!! The green warden is a popular favorite, but the original one was made a while back, and I have since learned new tricks so this little dude got the spa treatment! I changed the links and made them a little more hidden and beefed them up! I have also added a few new variations
In this pack you will get the following models:
- Green warden OG (improved mesh)
- Green Warden Remake
- Green warden dice buddy
- Green Warden ...
2023-05-23 23:11:55 +0000 UTC
View Post
Hii!! Happy monday!!
Although we are nearing the end of the month, I am hoping to cram a few more releases! One being the green warden remake!
See you guys soon!!
2023-05-23 00:50:50 +0000 UTC
View Post
Hii!!
Another fun collaboration with Gladiator Designs 3D! This one is for the Raven footling, and I absolutely love this haunted, Edgar Po themed house for the raven!
A few important things to note:
- Gladiator designs was kind enough to offer the file to you guys completely free! I am going to attached the file to the bottom of the post, scroll down and you will see a download link!
- If you want to sell the prints of the ra...
2023-05-16 02:05:37 +0000 UTC
View Post
Hii!!
Happy monday! I just wanted to check in with you guys! Im loving all the butt goblin makes they are so wonderful!
I have decided to take on a bigger project which is going to take more work then usual! I am taking my time with it because I want it to be as perfect as possible and it’s coming along great! I will hopefully have a sneak peek for you guys soon!
I also have a collaboration post coming later today for one of the footlings! so stay tuned!!
2023-05-15 14:35:29 +0000 UTC
View Post
