7800X3D 2200 FCLK, 2x16GB DDR5-6000 CL28 Hynix 16Gb A-die, Gigabyte X670E Master
Added 2023-06-23 17:23:03 +0000 UTCCPU: Ryzen 7 7800X3D
Cooling: 240mm Asetek AIO
mobo: Gigabyte X670E Aorus Master
BIOS: F10
RAM: Kingston Fury DDR5 2x16GB 7200C38 Hynix 16Gb A-die
RAM/SOC voltages
VSOC: 1.2V // High VSOC usually limits max FCLK
VDDIO_MEM: 1.3V
DDR_VDD: 1.43V // make sure your RAM has good cooling
DDR_VDDQ: 1.3V
VDDG_CCD: 1050mV // raising this can help stabilizing high FLCK
VDDG_IOD: 950mV
RAM/SOC clocks
MCLK: 3000MHz = DDR5-6000
UCLK: 3000MHz (UCLK = MCLK)
FCLK: 2200MHz
Primary Timings --------------------------------------------------
tCL: 28
tRCD: 36 // some kits may struggle with this
tRP: 28 // probably not minimized
tRAS: 30
Secondary Timings -----------------------------------------------
tRC: 58
tWR: 48
tREF: 65535
tRFC1: 466 // can go lower
tRTP: 12
tRRD_L: 8 // can go lower on some kits
tRRD_S: 4
tFAW: 20
tWTRL: 16
tWTRS: 4
Tertriary Timings -------------------------------------------------
tRDRD_SCL: 4
tRDRDSC: 1
tWRWR_SCL: 2
tWRWRSC: 1
tWRRD: 4 // probably could be lower
tRDWR: 16
Any settings not listed above can be left on auto.
Stress tests passed:
2000% HCI memtest
Testmem5 4x Extreme1 Anta777
100x Linpack Xtreme 10GB
notes:
this was mostly a test of A-dies ability to do low tRP. Thank you to Gigabyte for providing the motherboard
Comments
can i use this setting on 64gb kits? currently running G skill trident Z 6000mhz cl 30 and its an M die kits
Steffano Claudyo
2024-03-10 15:01:28 +0000 UTCNice! Runs well on my b650m. Running fclk at 2133, don’t know if I want to roll the stability dice for it at 2200
Ryland Kirzinger
2024-01-07 06:18:55 +0000 UTCyeah should work as long as you give it enough voltage.
Actually Hardcore Overclocking (Buildzoid)
2023-11-11 03:48:56 +0000 UTCcan i use this with an M-die?
Κωνσταντίνος Νασιώτης
2023-11-10 18:26:36 +0000 UTCSomething weird happened. Bios was setting tCl 40 instead of 30 no matter what I did. Even setting Expo on did nothing. Eventually got a lockup in bios, reset, Fv fragment error warning and reboot into windows telling me my security descriptor has changed and to reset pin code. After that went through OOB experience. Had to reset cmos and start over. At 30-40-40-96 rated Expo timings manually entered. Now all secondary and tertiary timings are on auto with VDD at 1.39, VDDQ 1.35, VDDIO 1.30. Even got electrical mini zap touching reset button on front panel. Not good.
David N Moheban
2023-07-07 21:25:20 +0000 UTCTimings in parentheses are from your write up done here. Also my Tras is at 96 as I have 30-40-40-96 1.4 v timings. I have seen others go much lower.
David N Moheban
2023-07-07 13:59:49 +0000 UTCTrc 68 (58) Twr 48 Trfc1 500 (466) Trfc2 400 Trfcsb 300 Trtp 12 TrrdL 8 TrrdS 4 Tfaw 20 TwtrL 16 TwtrS 6 (4) TrdrdScl 4 TrdrdSc 1 TrdrdSd AUTO Trdrddd AUTO TwrwrScl 4 (2) TwrwrSc 1 TwrwrSd AUTO TwrwrDd AUTO Twrrd 2 (4) Trdwr 16
David N Moheban
2023-07-07 13:58:49 +0000 UTCSorry which timings? Tight? You mean loosen? Anyhow here are the timings I was able to work up from watching your video:
David N Moheban
2023-07-07 13:58:37 +0000 UTCyou'd probably want to tight the DR and DD tertiary timings. As for what vlaues. I'd probably try 8 or 6 for them
Actually Hardcore Overclocking (Buildzoid)
2023-07-07 13:34:41 +0000 UTCHow would this differ if you had hynix dual rank A die?
David N Moheban
2023-07-07 12:56:58 +0000 UTCyeah that's been my experience
Actually Hardcore Overclocking (Buildzoid)
2023-06-25 03:27:31 +0000 UTCIs it just me or is the mobo and BIOS not making much of a difference for the overclocks on AM5? It seems to mostly come down to the CPU's memory controller and RAM.
tibbish
2023-06-25 03:07:39 +0000 UTC
