Bat Bobblehead Update
Added 2023-09-13 01:28:34 +0000 UTCHii!! Happy Tuesday!
I have been made aware that for some the head of the bat sits really low in the body which hinders its bobbling power! I had made some adjustments to the body piece to see if that would help! With this new version make sure that you are pushing the spring all the way into the socket, it should be going all the way in, if its sticking out and wont go all the way in try reprinting the spring 1% smaller
Make sure you grab the new body update from the current download post by clicking on the bat bobblehead link!
For those that have already printed it and noticed that the head is too low in the body this can be fixed by reprinting the spring scaled up 1-2% depending on your scale! for 100% bat I would try scaling the spring up to 101% and for the bigger ones like the 150% scale bats I would scale the spring up to 152%
Hope that helps!
Thank you!
Comments
For sure! Hopefully the V2 is better!
Christine
2023-09-14 04:21:41 +0000 UTCI had a couple of those in one filament. I found gently stretching the spring worked since I couldn't get them apart after snapping them together. Running under hot(ish) water might help. Glad to have this adjustment for future prints tho!
Maggie Thill
2023-09-14 00:36:00 +0000 UTC
