Hello again,
The end of the year is coming, and I'm starting to think more about where I want to go with my Patreon. I'm very happy with how things are going, but at the same time I feel like I can't keep going like this forever.
For example, one of my initial ideas for this was to work only with original models. I planned some fanart characters to attract some views, but I intended to make a transition later on. The obvious problem with fanart models is that they're not all...
2021-12-08 00:54:19 +0000 UTC
View Post
These are the models I'll release in the month of January, 2022:
- Belly dancer (original character)
Current status: ADDING SUPPORTS
SFW RENDER
NSFW RENDER
- Erza Scarlet Nakagami (Fairy Tail)
Current status: FINISHED
2021-12-08 00:43:49 +0000 UTC
View Post
Hello,
Here's an update on my Erza Bunny model. I've sculpted everything I intended for her, but tomorrow I'll still explore a couple of slight alterations in her pose. Things are moving fast here again because I'm at another slow moment in my job. Sometimes I consider quitting it to focus just on my Patreon, since I have many ideas for it that would require more of time, but then I'd have to be earning a bit more to justify that.
Nevertheless, I'm almost ready to start prep...
2021-12-08 00:37:32 +0000 UTC
View Post
Hello again!
Just to keep you guys fully updated with my current projects, for January's cartoon model, I've been working on a Mavis sculpture during the past few weekends. I used as reference a pose from a Vampirella illustration I once found online. Mavis was a long-time request, and I also wanted to try my hand at her.
She's still not ready, though. I need to finish her 3D printing preparations, and then see if there's anyone willing to help with the pre-supported version...
2021-12-06 22:38:43 +0000 UTC
View Post
I finished preparing my Erza Scarlet on her Nakagami suit for 3D printing, and here you can see the results. As you may have noticed, Erza will also come with another brand new pose for the bunny suit that won the poll.
She'll be released on January 2, 2022.
If anybody's interested in helping me with the pre-supported version, please contact me, as next month will probably have four models in the release, and I'll only be able to deliver pre-supported versions with you...
2021-12-06 19:46:17 +0000 UTC
View Post
Hello!
I'll post some updates about my current projects later today, but I'm already planning the last model for January's release: Erza Scarlet in her bunny suit. This was the winner outfit from my poll, but I wanted to sculpt an actual armor first. At first I thought I could reuse the pose and just build another outfit over it, but I believe it would look out of place.
That's why I'm going to make another model just for 2021-12-06 16:02:42 +0000 UTC
View Post
I'm sharing a new wip of Erza with you guys. She's basically done at this point. I'll start finalizing her tomorrow.
I don't think just replacing her suit for the bunny one will work in this case, though :/ I'll probably try to make another pose, a much sexier one, for the bunny. If I could reuse the hair, that would save me time enough, I guess.
But that will depend on how much time I'll have before I take my leave on December 20. I'd also love to make a Mavis f...
2021-12-03 00:30:02 +0000 UTC
View Post
Hello!
Patreon's finished processing all pledges, and now it's release time. This release will be a bit different. Besides adding the usual Google Drive download link, I'll also add itch.io download keys. This will be good for those who don't want to download my models now, but want to do so in the future without having to ask me for older models. I strongly encourage those without an itch.io account to create one now.
And since I'm trying a new process, if you have an...
2021-12-02 09:19:44 +0000 UTC
View Post
Hello again,
I'm already sculpting the Erza Scarlet statue, after the last poll's results. This is how things are going so far for the Nakagami armor version. Most assets are still rough, but I've a got a few things ready by now.
She'll be released on January 2.
2021-11-30 00:44:11 +0000 UTC
View Post
Hey!
Release day is coming, and I just want to let you guys know that this month's pre-supported models had the help of a few of my patrons. I'm sharing a few photos with their results.
Robert West and B C worked on adding the supports to my Chel model, and they also test printed her.
Jupp3 test printed my Janet model.
There was no time to test print the supports for the Dr. Mrs. The Monarch, but the pre-supported version will be included as wel...
2021-11-29 22:32:38 +0000 UTC
View Post
Hello,
The Erza Scarlet outfit poll currently shows the Bunny outfit as the winner. However, as some others have pointed out, it's indeed a bit too common. I want to work on it because it's the sexiest of all outfits and I like that, but I also want to make something more unnusual.
So I'll try my best to first make the Nakagami outfit, which is the current second place and also my favorite, and then I'll create an alternative version with the bunny suit in the same pose. I h...
2021-11-26 16:33:06 +0000 UTC
View Post
Hello again,
Since I was waiting for the definition of my next character, I went ahead and finished the Stefania Ferrario bust on which I was working. I'll release her for free later, while keeping the NSFW exclusive to my Welcome Pack.
But before that, I want to share it with you guys by using another method suggested by one of my patrons. This has actually been an old demand, to be honest, although I had never found the best way of applying it.
Many of you woul...
2021-11-25 23:08:07 +0000 UTC
View Post
Hello!
Well, it was a long battle. I waited as long as I could to get the latest poll results. It's stable now, and the winner is Erza Scarlet by just one vote:
Sorry for those who wanted a She Hulk :( This was a really tight dispute.
But since Erza is my next fanart character for the January release, the first thing I'd like to define with you guys is what outfit sh...
2021-11-25 20:14:28 +0000 UTC
View Post
Hello,
The Belly Dancer character is ready :) Her 3D printable parts will be quite big this time, as I couldn't find many places to slice her up without obvious seams. Only the full naked body won't fit in an small build plate, and because of this I'm adding a version of her naked body split in half.
As you can see, her outfit has a couple of variations. I hope you guys appreciate the final result.
She'll be released on January 2, 2022.
2021-11-24 23:49:37 +0000 UTC
View Post
Hello,
The current poll is currently at a draw, and I'm waiting for more votes to see if She-Hulk or Erza Scarlet is the winner. If tomorrow there's still no clear winner, then I'll just pick my favorite of the two.
Meanwhile, though, I'm finishing the 3D printing preparations and the renders for the Belly Dancer character. And since things are a bit slow here due to that, I want to share with you guys a smaller project I've been working on during the past few weekends. ...
2021-11-24 00:50:14 +0000 UTC
View Post
Hello,
The current poll for my next fanart character has been very exciting, as I believe we've had three leaders since it's begun. Right now, Erza Scarlet is the winner, but on a tight margin, so I'm creating a secound round with the three most voted ones, just to make sure. The winner this time will be my next character.
1 Erza Scarlet - Fairy Tail
2 She Hulk - Marve...
2021-11-21 23:12:33 +0000 UTC
View Post
Hello,
Before I leave for the weekend, I want to show you my progress with the Belly Dancer. I'm almost done with the sculpting part, as I still just want to check a few anatomy things before I move on to the next steps. I need to take some rest and take a look at her again next week with fresh eyes.
Nevertheless, I hope you enjoy the result so far :) I'm particularly loving to work on this model!
2021-11-20 00:06:05 +0000 UTC
View Post
Hello!
Thank you again for all those who contributed with their suggestions to my next character. As usual, it was hard to pick only ten of the suggestions, as I had to let a lot of good ideas behind, but hopefully I'll get back to them in the next polls. Now please pick your favorite for the fanart character I'll release in January!
Keep in mind that these are not the final poses. Just character images to help with the voting, since most people don't recognize all character...
2021-11-19 19:17:08 +0000 UTC
View Post
I made a lot of progress with my Belly Dancer character in the past two days. I adjusted a few things of the winning pose, and then started working on the final sculpture. This is a complex model in terms of anatomy, but sculpting the body is the part I always enjoy the most, so the challenge excites me :)
Most parts are still rough, but the current stage already gives us a good notion of how it may look like in the end. I hope you're enjoying it so far.
The Belly Danc...
2021-11-18 00:31:12 +0000 UTC
View Post
Hello,
Since all models for the December release are ready, and since I've already started working on the Belly Dancer for the January release, I need to define the fanart character for January now. Like I've said before, I'll take a two week's leave in the end of December, so I'm trying to work on the January release way ahead of time to keep things constant.
As usual, I'd really like to know your suggestions for the next fanart character. Please try to keep your suggestions to o...
2021-11-17 22:45:06 +0000 UTC
View Post
Hello again,
I made three models for the December release: Janet, Chel and Dr. Mrs. The Monarch. That's enough for a month, but there's still half a month left. What's going on, you may ask?
I intend to take a two weeks' leave at the end of the year. This means I'm trying to speed things up here so that I can keep up with my releases in the following months. I could try pausing the bill, but I want to enjoy the fact that my daily work is light these days and see if I can keep my c...
2021-11-16 18:31:55 +0000 UTC
View Post
Hey!
I finished my 3D model of Dr. Mrs. The Monarch today, as you can see in the images. She won't come in a 32 mm version, but the regular version will be pre-supported too. I was glad I had the time to work on a simpler model this month, and I thank the volunteers who helped adding supports to my Chel model for that.
She'll be released on December 2.
2021-11-16 18:23:09 +0000 UTC
View Post
Hey!
Just a quick update about Chel again. I made an alternative head version trying to get her closer to the original movie's style, just because a couple of people had mentioned this idea. Since I was curious about it too, I decided to work on it, although I can't dedicate more time to it.
The model will come with an alternate head, but this probably won't be pre-supported. There will also be 32 mm versions with this head, but probably also not pre-supported as well. ...
2021-11-16 00:11:28 +0000 UTC
View Post
Hey!
Since you guys helped me choose the pose for Dr. Mrs. The Monarch yesterday, I took the day to sculpt everything I could for this character. And since these cartoon models are a lot faster than the regular models, I believe the model is done :)
Here's the result, and if there's nothing to change in the sculpture at this point, I'll start preparing her for printing.
She'll be released on December 2, with Janet and Chel.
2021-11-11 23:13:49 +0000 UTC
View Post
Hey!
I started working on the cartoon poll's winner, Dr. Mrs. The Monarch, and I'd like your help to pick the pose for her. Which of the two do you like the most?
2021-11-10 19:52:24 +0000 UTC
View Post
Hey!
Does anyone want to help with Chel's pre-supported version? That will give me more time to work on this month's cartoon character. If you're interested, please contact me through direct message and we'll talk more about what I've got so far.
2021-11-10 17:43:11 +0000 UTC
View Post
Hey!
I've got another day at work just rendering stuff, so I had time to process the renders from Chel, and also finish her 3D printing preparations. She doesn't have many parts, as her outfit is quite simple, and I didn't want to split her body into multiple parts. I'm including a nude body as a single piece, and also one split in half, because the whole body wouldn't fit in a small printer.
But there you go, my version of Chel based on the cutesexyrobutts illustration. Thi...
2021-11-10 17:39:24 +0000 UTC
View Post
Hello!
Thank you all who contributed with ideas to my next cartoon character. It was very difficult to select the ten options, as there are many ideas I'd love to add here from the ones I've read. I'd love to make a Diane from Bojack, for example, or a Jessica Rabbit, or a Marge Simpson. I hope their time will come some day :)
However, these are the ten options I chose for this poll, based on your interaction in the post. Pick your favorite, and the winner will be my next ch...
2021-11-09 23:00:44 +0000 UTC
View Post
Hey!
Here's an update for the Chel model. Since she hardly has any outfit pieces, most of my work was focused on her body and hair in the past few days. Now I believe I have finished sculpting everything I had in mind for this model, and I'm starting to test a few render shots.
I hope you guys approve of the final result, but if there's anything you notice at this point that could be improved, I'm here to fix that.
2021-11-09 16:34:34 +0000 UTC
View Post
Hey!
I may have some time in this month or the next to make an extra cartoon character. That's not a promise, but that's something I want to try. And that will also depend whether we'll have any volunteers to help with the pre-supported version of Chel.
But I want to have a character already defined, in case conditions allow me to do as I hope, even if I can only finish her next month. That's why I'd like to ask for suggestions from you guys, since it's been a long tim...
2021-11-08 23:12:12 +0000 UTC
View Post
