Just a random one I did that I thought to upload as it does come out nice in shiny filaments for anyone that likes fast spiral mode prints.. Just turn on spiral mode and remember to set top layers to 0.
Hi all,
Firstly, I try and steer away from anything dramatic here and just keep it about the models.. but seeing as how everyone is connected to everyone these days, sometimes you just feel you need to get a word out.
The reason for this post is there is another file sharer (only this time quite open about it) and some of the files he is group selling are Patreon files from here, notably the hero chess pieces.
If you know this person, please do not share anything with t...
2018-10-12 01:40:23 +0000 UTC View Post
Well, while my CPU is crunching the ironman suit away (each piece starts at about 1.5gb in size... pretty much unsliceable in most slicers.. so they need to be decimated (which is where you re-organise the final mesh and polygon count more efficiently and reduce the file size without sacrificing quality too much) so I thought i'd post some WIP's along the way.
Hulk still needs some work, never was really happy with the face, admittedly spent too long on the abs and chest... bu...
Please find the the Jug in the links below. While these will all be support free, this bastard decided to stick his thumb out at the last minute and to change the angle to fix just a few islands .. well, i'll just give you a support version also for this one :) The rest will be support free, I just did done stuff up this one on the raised fist (sure can cut both arms off and avoid the problem all together) but am trying to make the chess pieces as dynamic as I can for torso-upward figures.
Okay... face painting day done ... im tired :) its been a long day..
Just browsing through some old works in progress and stumbled across this that never got finished. A customer ordered a hocus pocus book and then fell off the face of the earth, couldnt get in contact with them etc.. so basically it never got finished. I see alot of these made so I figured its a prop people might want, if there is some interest im not fussed on finishing it off (it was meant to have an animatronic eye optiona...
2018-09-27 11:00:12 +0000 UTC View PostWill be offline for the whole day today doing this face painting thing at the fair, have been busy all week printing stencils for airbrushing tattoos, flower stencils... etc, all sorts of crap... but after today its all over thank god and we can get back to normal. My youngest daughter only has 1 more year of primary school so thankfully these sorts of things are getting far and few between!
So i'll be offline pretty much all today sorry guys, but tomorrow back on board full steam and all the ...
2018-09-26 23:21:54 +0000 UTC View PostI had a few people ask me when/if more starwars props are coming - yes most definitely. I just needed a break for a little bit.
I have worked on starwars based props for printing for at least the last 7-8 years... it's something I love doing and will continue to do.
Starwars is one of those franchises that is so massive in its scale, of movies.. comics, books.. niche' fan created stories and characters ...cartoons... it can be daunting when faced with what to make next and ca...
2018-09-25 03:01:15 +0000 UTC View Post
Okay after much re-fitting of parts I am 99.9 percent sure this thing is ready to print!
I have printed most parts of it, I ended up splitting the hilt into 4 pieces so it could be printed upright as I wasnt happy with the big flat print with alot of support underneath - BUT.. included are Hilts Part 1 and 2 which are uncut if you desire to print them in 2 pieces.
The switchblade mechanism is manual for the moment, i'll work on a spring modification if I can find some time...
Was about to upload him today and took a second look and thought nah.. he needs some more work, and im glad I did because he looks better than he did before.
Just fitting him to the chess base and will upload but thought you might want to see what its going to look like.
Hi everyone,
*This is not directed at anyone in particular, it is just a short generic rant.
While its fantastic seeing all these etsy stores pop up selling props from files here, it is a little concerning seeing a small handful of them using not only my renders (and renders from my sales pages on CGT no less) but removing the logo.
As I've said I have no issue with people selling props or any prints - go for it - but if you are going to use my renders to advertise your pro...
2018-09-21 16:58:07 +0000 UTC View Post
Supplied Uncut, this will need to be scaled to your head specifically for a good fit. Cowl has been test printed also and comes out very clean.
Neck/shoulders are optional - they are a separate piece so thats totally up to you.
More coming!
Level 3 stuff and level 1 still coming, plus more helmets... (I told you i've been busy! :) )
Ironman mk-3 helmet I have to say, out of all the model's i've done im pretty happy with the way it turned out, i really can't ...
(yes, full axe, please see pics below)
This was one of those models that came out necessity for a friend, so ironic coincidental to upload with the Kitsune mask :)
Sorry forgot to put the Chain in the main .zip, will attach separately below.
It should print in one place, no supports.
This thing is pretty big when printed, its 76cm long in its currently form - but if you do want it bigger, say to get it to say 1m long, just increase scale of all parts to approx 125%
Got a little carried away on birthday dinner and cake last night sorry... ended up as usual on the couch and woke up and 3am to a fire that needed more wood... (hey don't judge me... this happens when you get old lol..)
Models flowing now, just as always triple checking for errors etc.
I've plated this one for you guys on a flat surface at the back, can print in one go pretty easy, ears are above support threshhold so they shouldnt generate supports.
and yes, I took some tim...
Heya! Wall of text sorry...
My lack of activity on here does not reflect the activity off... trust me :) I could sit here posting updates all day.. or I could be making new models.... :)
Even though my last week has been very tight with print jobs for customers, getting things organized for my daughters birthday today (11) and also practicing my face painting skills as I've been roped into painting some 300 kids faces at the local school fair at the end of September. (Y...
Welcome to the new patrons we have gained over the past few days.
If you see any previous releases (dating back to forever) where a link is inactive (which is most likely the case for all the old dropbox links) please message me here and I will send you the link.
I'm just about to start releasing parts of the Mk-3 Ironman suit (at least the parts that don't need movement or mobility added) and in the next couple of weeks we are going to go over the tricky parts and print as we go, ...
2018-09-14 07:14:13 +0000 UTC View Post
This is the 30mb version and the newer super low 7mb version for people who are printing this smaller than full scale. I.e if you are going to print this at 50% or lower on a standard FDM printer, you might even want to print the 7mb version instead - it's totally up to you.
*100mb SLA version has been attached below
Because, why not. :) (pic above only has shadows turned on in the render, that's not a texture...)
This will be uploaded tonight when I go to bed, it's a pretty big file. There are two versions, SLA and FDM.
The SLA version can be printed on a normal printer but be warned, its over a million poly's and 100mb... so it will take some time to slice so I suggest the FDM version (30mb) which will not show the artifacts from lowering the resolution of the model (hence lowerin...
2018-09-10 11:59:20 +0000 UTC View Post
Thank you to everyone who chimed in on the Ironman post. I was initially going to start with MK-5 being the more popular, but honestly I have done a far more complete job on the MK3 and there are some things I still want to figure out as we go so the MK-5 will come after this (its much easier to go forward in marks than backward given the evolution of the suits. I also don't need to make these to a 501st spec, I can go back to using the movie and my own eyes.
I am currently ma...
2018-09-07 20:29:12 +0000 UTC View Post
I think i've made this fairly print friendly now. If any part uses support, it was to not sacrifice the text on a specific panel, ie I didnt want the text to be on the bottom layer as it will print much cleaner upright.
Should fit on just about anyones build plate without any cutting up required, all buttons are separate pieces (I suggest scaling all buttons down before printing to 99.8% to avoid any tight fits)
The hinge is untested.. but I'm pretty sure.. err well I hope it will ...
2018-09-03 10:19:26 +0000 UTC View Post
This is a funny blaster. I have seen in detail now 4 different versions of it... Some have bolts under the two main rings that hold the missile thingy holders... some have the two winders above the trigger being more slanted in toward the bottom, whereas others have it dead straight (check V2.jpg in the attachments below)
Only really two additions need to be made to this and that is an alternate grip and the two bolts under the missile holders, we're talking 5 minute jobs a...
****EDIT***** Have added new parts with thicker swords and a slightly smaller hand/pistol on the left hand if anyone needs a more OCD friendly version... if not you can just say he was mid-regeneration :)
This is the cut version, the full version (being 191mb...) i'll upload after this, just in case it bombs out on me. This is the small base version. I was not happy with the big base with the pile of bodies, it was really rushed and also made the overall deapool size smaller th...
I won't make this a long post.. just about finished cutting this into more manageable pieces (and full of course available ) and will upload him. If you've seen Deadpool 2, you would have seen the awesome opening credits, and a scene where the camera zooms in through a hole in deadpools chest.. this is that scene. (and Im just noticing i missed the sword sheaths... (and unlike colossus and deadpool the backpack on this one is a separate piece so its much easier to print)
I personally won...
2018-09-01 09:08:29 +0000 UTC View Post
After I posted the TFO Snow trooper mod kit I was asked by a few people if I could please make an original snow trooper up, so here it is :) Thankfully a very symmetrical helmet and low on detail, not a tough one.
I have done a very simple cut on this one, there is a full helmet, 2 part version and a 4 part version, so no assembly instructions required - but feel free to cut your own. The 4 part version I think should squeeze on an ender... maybe..
Lenses are included, snug fit so they ...
You can thank Telli for pointing out that this model just wasn't available anywhere, not even a pepakura file. There could be some of the helmet printed as is, but not the base model needed to put the fabric over like Chuck Williams did, so thanks to his detailed photos I was able to make a copy of the base.
File is attached below, nothing too difficult here that requires instructions, I would be googling chucks work on his version which seems to be the most accurate, while he doesn't in...
Heya!
Well, as promised there will be several suits of armor coming (not dribs and drabs.. )
I have just finished up a Luke/ESB bust which I am literally just cleaning up, and it will be uploaded here for lvl 3.
I own a Forsche copy of Mark's life cast which I 3D scanned, took into zbrush and restored as much of the missing detail as I could without screwing it up, so this is actually the real deal as far as Mark's face goes. I know his eyes are open in the movie, but esse...
Sorry guys, for once my problem is completely reversed... I can upload fine but I can't download jack...
My ISP has had a nation wide meltdown and after 2 days are still trying to fix it, essentially I am down to as you can see 0.1mbps download, it's just making life a little tough. It's having small moments of hope and the speed will go back up for a few seconds but then i'm back down on the bottom... They are working on it, but I am not the only person affected on this one unlike...
A few requests for this to be made a patreon model, so here she is!
This F-11 has already been printed by several customers of mine, The photo above is Sergeys print and finishing job of this model, the photo of the pink one attached below was another customer (was to match the pink female stormtrooper outfit)
It is assembled in 10 easy to print parts, assembly instructions in the zip file. If anyone wants the uncut version, you will need to message my...
2018-08-21 18:00:41 +0000 UTC View Post
Could be used for a Deadpool or Spiderman outfit alternatively, but more shaped in spidey style.
As you might have noticed, all of the links to the models are now contained within the post they are in.
This is the only way I can prevent the dropbox links being shared externally to here - it just makes it too easy for the not so nice people.
I had 149 patrons, but over 185 individual IP's accessing the Patreon dropbox, so give or take that was 40 people who should not have had access, having access. So.. problem solved, no more dropbox. I've started adopting the tags so things ...
2018-08-19 02:11:49 +0000 UTC View Post
Well, a few people have asked for it to be pushed along.. so here she is. Instead of me procrastinating on how to cut it best i'll see if someone else wants to have a go while i'm getting the new hero chess pieces ready.
I need to note - I did not make this like I normally would and plan the cuts ahead of time.. this was done over several months on and off. I have the queen model now totally rigged for every bone in its body (the reversed knees were a good lesson in anatomy.....