darkrealms

Release Season 2022 - 2023

Here's the release schedule for the next 12 months

July 22 - Vladistov Expansion 2
August 22 - September 22- Fantasy Mont Sait-Michel (Capital of Arkenfel)
October 22 - Wood Elf Expansion 1
November 22 - Lake Town Expansion 1
December 22 - Artist Choice
January 23 - Necropolis
February 23 - Ancient middle-eastern terrain
March 23 - Dark Elven Realms
April 23 - Ratmen Tunnels/Warrens Dungeon Tiles
May 23 - Modern Post Apoc

We had a lot of great suggestio...

Last few bits for June!

Hello folks! 

Here are the last few buildings for June's release. As mentioned at the start I wanted to make some furniture to fit into the bank/library building. I'll be working on those in between blocking out the new VLADISTOV terrain that's coming in July! 

I'm just about to compile next season's themes, so look out for that post coming shortly!

Thank you for all of you support for June! It was another tough one, but we got there!

Here's to the next seaso...

Airship Station and Corner building released!

Hey folks! 

Just to let you know that the Corner building and Airship Station have been released and invites sent out. I've got a couple things left to work on for this month, so again we're going to the wire again!

Thanks!

Airship Landing Station WIP

Hey, folks! Just a quick work-in-progress for the airship landing station. Just need to clean up and get the parts print-ready. 

Hopefully, have this ready by tomorrow morning!

Thanks!
Pinyo

Welcome back!

Hello friends!

Apologies and thank you all for your patience! Our first building for this month was again a big challenge as I wanted to make it modular for any future additions! 

The Library/Bank can be made as wide as necessary from the base model. Just keep printing the middle sections! I've finally got the elements I need so the next few buildings should come faster. 

I would still like to use the last week of the month to make some interior furniture for the l...

Return to Laandan!

Hello friends!

Welcome to a new month as we return to add more buildings to the Laandan range.
I've begun blocking out the new buildings and plan to have a few to make up a street. I'm trying to block out the above building to be modular so you can print a whole street length if you really wanted to.  The interior will be open to being used as a library or a bank! I'm going to be aiming for about 5-6 new buildings as I would like to model some furniture to fit into the library/b...

Manor, Townhall, and shop released!

Hey folks!

Just a quick one before we hit the Friday feels! The above sets have been sent out. Supporters that haven't received an invite from MMF regarding the update, please let me know!

Thanks!
Pinyo 

Kasen Port Ruins

Hello folks and welcome to a new month! We are getting closer to starting a new "season" of themes that you have voted for! 

This month we are returning back to our first ever release! The ruination of our first ever Kickstarter terrain. The set that began it all! 

Firstly I would like to thank you all for your support and especially those that have been with me from the absolute beginning! 

Anyhoo, here is the first part of this month's release, there's still...

Poll for the next 12 months from July

Hey folks!

As mentioned here is the poll for the next upcoming projects for Patreon. The top 12 will make it into our schedule for the following months done in popularity order. You may vote for more than one option!

Also, as requested before, I will have an expansion to Steampunk Landaan to add to the current release over June.

Thanks and happy voting!

Barrenfall Manor Ruins added!

Hello friends!

Just a quick notice that we are nearing the end of this month's releases! Just added is the Manor ruins!

It comes in three sections which you can utilise as ruins on their own as well as making up the manor. 

There's just the Tavern/Inn left to do, which hopefully I'll have done by next week. Unfortunately. I've just caught the 'vid and it's slowing down my brain somewhat with sniffles and coughs, but I'll definitely have the last building done before the...

Tower and Shop ruins added!

Hello friends!

I hope you've all had a great weekend. I just wanted to let you know that the shop and tower ruins have been added to the library on MMF and DTRPG. 

I will be collecting up all of the suggestions for the next projects and set up a poll in which the top 12 winners will be making up the next themes. The poll should be up later this week and run up to the end of May.

Thanks!
Pinyo

I'm in love...

Hey folks!

I hope your weekend is going well so far!

I know I'm late to the party, I know many of you have already used our terrain for 6/10mm scale games. I have just taken this months (current) releases to the resin printer and printed out some 10mm  (I think) scale terrain.

Not one to blow my own trumpet, but at this scale this buildings look great! It means that I can actually do some more painting in a fraction of the time!

Suffice to say, I have added the on...

April 2022 - Barrenfall Ruins

Hello friends!

Welcome to a new month and new(ish) theme! We're taking a trip back to the terrain set from Denizens of Fantasy and doing some damage!

Thee first few models have been sent out and the process is ongoing to get the others doing over the next week or so.

I think I forgot to make a post last month with the release of the church for Tortuga. Hopefully backers will have received a notification from MMF with the addition to your library.

We are coming close ...

More houses released!

Hey folks!

Just to let you know that I have just sent out the rest of the houses for this month! 

I'm just about to get on to working on the church, hopefully it'll be done next week - so keep out an eye for that!

Have a great weekend!
Pinyo

Tortuga Houses 2 and 3 released!

Hey folks!

Just a quick and friendly notification to let you know houses 2 and 3 have been added to the library on MMF. 

Thanks!

Tortuga House 1 released!

Hey folks!

This is a quick message to let you know the first house has been released, so please look out for the invite for the download.

More releases coming over the next few days!

Thanks!

Pinyo

PS balustrades and staircase are separate and I would recommend using a resin printer or settings for minis to print them

Tortuga March 2022

Hello folks!
I've finally settled back in to the office barring the jetlag getting me sleep after lunch!

Anyhoo, I've blocked out this month's set and have settled on the old Spanish side of the island as I had made timber buildings with the Port Royale set. You should be able to mix both sets together and create a nice little haven for pirates!

Next up... Textures!

Thanks!
Pinyo

One more to come!

Hello friends,

Thank you for your patience and understanding regarding this month's project. It was promised to be so much more but my laptop had other plans :/

I have so many different buildings in my mood board and I will bring you the best from them. I am heading home on the 2nd of March so my work should be back to normal as I get back to working off a more powerful workstation.

I will tack on the additional buildings as an expansion month, which will be added to the end...

Steamtown Station released!

Hello folks!

My sincere apologies for the delay with this release. It has been a very big challenge getting it ready for print which had caused the delay as I wanted to make sure everything was just right.

The model has now been sent out, however, I would kindly request that you hold off from printing the elevator parts as I need to make some final checks on it. But the rest can be started!

I've got a few days left to go so will do everything I can to add to this range befor...

Laandan Steamtown

Hello friends!

Welcome to a new month and a new theme. This month we head to Laandan. A city of steam and industry. I've been working on the main release for this month - the Grand Central Station.

I've still got to work on the texturing and preparing for print, but I hope to have it ready over the weekend!

Also coming this month are smaller buildings that you can use to build up a street hopefully have a WIP after the completion of the station. I think I need an airship lan...

Stave Church released!

Hello folks!

We come to the end of another month and the completion of the Viking theme. Thank you all for your support this month. I hope to have a WIP for next month's Steampunk London theme some time this week! 

Until then, I would just like to let you know that the Stave Church has been released and sent out to backers. Please check your inbox for the update message from MMF.

Thanks and have a great week, everyone!
PInyo

Odingard Houses Released!

Hello folks! 

Just a quick message to et you know that the houses  for this month have been released! Please check your emails for a message from MMF for the update.

All houses comes with two versions - a thatched roof or tiled roof version.

I'll be working on the final Stave model for the next few days so hopefully you should have it near the end of the weekend/Monday!

Thanks!
Pinyo

Odingard Hall released!

Hello friends!

Finally got the first model out for this month's theme. Apologies for the delay, the first one takes a bit longer as I work out the texture and the extra details I wanted on the model.

From here on in, I should be able to get the rest out in better time (famous last words lol).

Backers should have received an invite to get this now.

I'll keep you updated with more WIPs next week!

Thank you!
Pinyo

Happy New Year Dark Realmers!

Welcome to a new year, friends! I hope you have had a nice time over the festive season and managed to spend time with those you love!

I would like to take this moment to thank everyone for their support and backing over the past year. It has been immense and uplifting to see the community grow and share pictures of their prints and painted models!

Now, for the start of 2022...

Welcome to Odingard! The new range for the Viking/Northmen theme. I am going for a bit more develo...

Eberron - Lightning Rail released!

Hello friends!

As some of you may be aware I have been modeling a Lightning Rail train. I have finished the bulk of the cars and wanted to get this out to you as soon as I could so that you could get a start on this if you wanted!

The release will be sent to Patrons old and current. It will then be released generally to everyone else early next year. 

It is a gift from me to you as a way of showing my appreciation for all of the support I have received since I started t...

Welcome to Neocity!

Hello friends!

I would like to let you know that this month's set has been released to patrons. Please check your emails for messages from MMF or DTRPG. I have a few extra bits to finish off but the bulk of it is done!

I'll be catching up on admin and replying to messages that have been sent (apologies for the super late replies!) I'll also be completing some final bits of the lightning rail to keep on track of releasing it before xmas! 

Unfortunately, I've been really ...

December's Sci-fi/Cyberpunk & xmas gift!

Hello friends!
Apologies for the delay in an update for this month - a lot of tinkering and tests were carried out as LEDs are once again part of this month's theme.

Here is the main building/site: the Power Station. I had thought of having this as a sort of encounter as well as the buildings being used separately. I'll be adding a warehouse block to it as well so you can have a raid on supplies scenario.
The electric fences can be lit up with LED bulbs.

Also, hopefully ...

BLACK FRIDAY SALE ON NOW!

Hey folks! It has come to my attention that there are sales going on all over the place. So not wanting to miss out here's our code for 50% off all models from our MMF store at www.myminifactory.com/users/DarkRealms

BLKFRIYAY21

The sale runs from Friday 26th to 30th November!

Thanks!

Atlantis released!

Hi folks!

Sorry it's taken a while to get these out! The blocks are designed to be big blocks of marble which I will be trying my best to try to paint later! 

I'll be adding some scatter terrain to dress the streets with plinths, statues, and fountains which I hope to have to you next week!

Thanks!

Cavern Scatter released!

Hello folks!

The cavern scatter has been released and sent out to subs! I'm sorry I couldn't get all of the suggestions done for this month. I had made plans for a LED lit mushroom and crystal scatter but just ran out of time! Perhaps next time :)

In this pack, you'll receive -

Spider's nest with egg sack and wrapped prey. This set comes with and without the webs. You also get extra webs that you can print and use a heat gun to bend into a place of your choice. Comes with o...