Edit(11/08/23): All the files for the Wercor Frame are up on PWG. As I just uploaded these, it might take a sec for them to show in your downloads library, and if they still haven't popped up in an hour or two please follow this post: https://www.patreon.com/posts/patreon-arcus-91743097
I recommend expanding the supported folder and downloading those individually as they've hung up at 100% on a few...
Finalizing the the Wercor kit is cutting a bit into my 4 day buffer I give myself at the beginning of the month. I should have the posts/renders up tomorrow for them. I just have the melee stuff left to pose~ Sorry for the short delay, I didn't think this kit would be this large x'D
~Pipes
I have been plugging away at this kit just adding and adding to it and I wanted to get one more WIP up x'D I've got a few more things left to model out (shields and a couple smaller shoulder pauldrons, and if I'm lucky a few nonsense bits), and then it's just, so much posing.
~Pipes
I reached out to PWG earlier this month see about sorting out the current issue with some folks not having this months files show up in their downloads tab (or rather a lot more then the usual amount) This is appaarently an issue with the updates Patreon made earlier this month messing with their backend, causing a few issues with PWG's integration, this is currently being worked on.
In the interim if you don't currently have access to the files and your account creation is past the typ...
2023-10-27 03:12:53 +0000 UTC View Post
Finally getting some stuff up on the base (TippyLeg variant) Wercor frame~
Mostly just been working through the base model, And getting all the forms set up for it.
This frames pieces will work with the previous VoidCrafted at a simple 1.25 Upscaling~ (and .8 for the downscale~) Some of the upscaled two held weapon poses might not work 100% with this torso, but all the single arms and the like will~
There will be a variant lower body with non tippy regular feet rest assured. Prob...
[Edit 10/4/23] ReRuns fileset should be up on PWG now~ If they're not showing up in your library just yet, give it a lil' time as things catch up or hit that sweet check for new downloads button in your library~
~Pipes
Now we get into the Meat and Potatoes units for the FishMech~ The Koi and Mako are two of what I considered to be some of my most versatile frames. So much can be built with the two kits together,
Fully poseable, and for the most part, interchangeable parts wise~ ...
[Edit 10/4/23] Arcus' fileset should be up on PWG now~ If they're not showing up in your library just yet, give it a lil' time as things catch up or hit that sweet check for new downloads button in your library~
~Pipes
I can't actually believe it's October x'D Like the Luminora, I started this thinking it would be a smaller kit, easy to knock out, and then work on a few other things, but that's never the case is it? (I did not get to Vacarsield Cor Platform.)
Anyway~ The ...
'Nother quick WIP before I model up the last few pieces remaining, but that's all the weapons for this kit~
I have the rear leg plate pieces to model out, and then all the posing, bits spread, and hopefully I have some more time to do a little bit of work on the Cor Weapons platform.
Also did a handful of test prints to continue to check how some of this stuff works out printed and so far so good~
Almost there xD
~Pipes
Just another quick work in progress update for the Arcus Frame~
I've got most of the Frame modeled with a few other bits (Coattail plates and some stuff that'll work into the rifle once I get the poses set up.
I'll be working through the rifle and alt barrels next~ And I did a few test prints to see how stuff was looking with a little test pose.
So far so good, and I'm really pleased with how some of the forms have turned out on this one as it's been a lot of challenging shapes to ge...
Just wanted to get some images of the WIP Arcus frame as it's been a sec (grey's a placeholder piece)~ I'm slowly prepping myself with the knowledge that each kit is probably just gonna have a bunch of variant lower bodies xD (Quilted/Ceramic/Ceramic w/Armor Plates (Not fully modeled yet))
And like others, there will be a few variant barrels for the rifle that slot in like previous (Each barrel set will be unique to the particular rifle and won't share the same slot as previous.)
Bu...
EDIT: September's Fishmech ReRun set is up on PWG.
(On the FishMech ReRuns, these files are on the older side of things and PWG's library sorts in chronological release order, so if you have a bunch of things, these will typically be at the backend of the library)
It might take a minute for them to actually show up in your downloads.
And if it's not poppin' up usually checking for new downloads will pull things in.
~Pipes
I meant to do one of these for the August Re-Run...
EDIT: All of the Luminora files are now up on PWG, RawOBJs/SupportedOBJs/PrePlates/and the T-Pose set for digital kitbashing~
I went with doing a plate for almost all of the poses in the Turntable set so there's some decent variety there~
It might take a minute for them to actually show up in your downloads.
And if it's not poppin' up usually checking for new downloads will pull things in.
~Pipes
It's that time again, and I've got a bunch of things for this set x...
Almost there x'D Just a couple more variant heads, and then it's just posing out all the generic stuff.
(I've already test printed the cloth support and find it to be on par with the CardinalFish~)
~Pipes
I keep meaning to make another work in progress set, but kept getting caught up in stuff xD
This pack is very quickly becoming a similar bits scope to the Vacarsield frame, and I'm glad that next month's Arcus frame doesn't have nearly as many variant pieces x'D
For the floating poses, I'll have a piece of anchoring fabric mounting to the disk piece on the backpacks. As a note, these work with the previous Vacarsield set torsos that have no armor attached as well. And then all t...
This is a lil' update as well as a Work in progress set~
For those on the discord, you'll know I was hospitalized again with what essentially happened 2 years ago when I was helivacc'd x'D But I caught it early enough on that i only had to spend a lil less then a weel in the hospital this time near the beginning of the month. I've got a bunch of followups, but it's never a dull moment with lupus x'D There is a non zero chance that this might complicate things a bit in the future bu...
I've gotten a few questions over on the discord and in my patreon DMs, so I've added the release schedule for the FishMech reruns to the welcome note for the FishMech_ReRun tier as well as the Releases_Reruns Tier. Not everyone's on the discord, but Patreon doesn't give you much of a good way to designate or pin a schedule for release. That said, I'm gonna make a board under read-first board on the discord that will serve as a schedule for things with the full FishMech list, and whateve...
2023-08-04 00:42:41 +0000 UTC View PostAs the title suggests the new tiers are live.
I've gone and renamed things a bit in an attempt to potentially mitigate confusion.
Overseer is now VoidCraft_Releases.
FishMech_ReRuns is the tier for well, fishmech reruns
Releases and ReRuns is the tier for both the current project (VoidCrafted) and the Fishmech Reruns.
Each tier gives access to the discord, and 50% off my PWG store.
Filesets will continue to go up on...
Edit: The Vacarsield Void frame is up on PWG, as well as the initial Rerun of the fishmech~ I've test printed all of the Vacarsield files as well as the preplates and everything should be good~
~Pipes
This has been a long time coming x'D I started work on gbase modeling and etting the VC concepted and modeled for the past 5-6 months x'D From getting more organic forms down in fusion to just general ideas and the like this start has been a fun one. I had a lot of help with getting th...
I've made mention of this a few times before here and on the Discord. The plan moving forward from here is to introduce two new tiers to the patreon as a response to the FishMech stuff mostly concluding here.
This all breaks down into the current Overseer tier, and two newer tiers (yet to be named)
The current $10 Overseer tier. This tier is business as usual, and will be where the VoidCrafted releases live. If you are only interested in the VoidCrraft, and are a...
2023-07-28 01:07:43 +0000 UTC View Post
I think this'll probably be the last work in progress set before I do all the final renders post for August~
Getting all the posed bits setup, and working through the more armored Base frame~
There will be a lot of ways to build this x'D Ran a few test prints of the armored one as airbrush practice, and just to make sure some of the bits will print ok~
I've got a few more pieces to get through, and an alt head set for the more armored one, but I'm almost done x'D
~Pipes
Hey! Long time no chat Piper. (I was a bit predisposed earlier in the month with some more hospital nonsense, but I'm mostly fine, no worries~)
Anyway the VoidCrafted, what's up with that?
I've been busy working through the base frame stuff (Vacarsield [VAC] Class VoidFrame), and I wanted to get some images up of where that's at so far~ I've got most of the base frame stuff set up, and I'm workin through the initial pose sets. After that's all wrapped, I'm gonna ma...
Alright~ The new website is up and functional. I need to stress that this is currently a Copy of CG&T, but it's a different color. Like a shiny Pokemon~ Over the next few days PWG will be starting to work in and implement a host of changes to the UI and systems. And once everything is set up, PWG will will make a full announcement denoting that things are out of "beta" so to speak~
2023-07-03 01:34:21 +0000 UTC View Post
[Edit: The ChucklingSquids Pre-Supports are up on PWG And that's it. That's all the fishmech, we're done here~
There was also an a small fix on the PosedArms_SingleArm_Pose4 but for some reason, the sphere wasn't actually there. A remodel of the area fixed it, and I've re-uploaded the files to the reinforcement packs. Specifically replacing the RawOBJs_Rifles_PosedArms.zip and the SupportedOBJs_Rifles.zip in the Koi/Mako reinforcement pack.]
Alright, last one~ I really j...
Hello! It's me Piper of PiperMakes~
This is an amount of information to cover for some of the future things for PiperMakes, so I'm just kinda get into it.
(presented in two formats because I thought when I started this post this morning, that a video would be a good idea):
So to start this off web tech site stuff:
I made a post covering some of this earlier in the year about CG&T getting a rebrand. Starting tomorrow, Comics Games and things will become Printed WarGames. Thi...
7/1/23: As I said in the post here: Big stuff and things post, CG&T is currently undergoing it's host migration to PrintedWarGames. This is taking a little longer then initially planned for, which is why the site is still currently offline.
When the site is back up, I'll have another post/announcement made regarding that. But until then I ask for a lil' patience while they get everything transf...
Just wanted to get another render set and a few test prints of things up~
The Koi scaled rifles are all modeled up, preposed, and loose files for single arm poses for these~ They should prove to be pretty versatile, and I'm pleased with 'em. They should for the most part be compatible with the koi and mako torsos as well as the halo torso seen further into these pics~ (But this is a thing I want to actually check just to make sure, I think there might need to be a little finagling, but...
I don't usually make posts like this on here, but I kinda, just, had to write this up after this morning.
A lot of you ask why I don't use MMF, or you already know that I have very little respect (read: none) for MyMiniFactory as a platform, and I feel I have a pretty decently sizeable platform to vocalize this too.
Some of you may know about the issues/bugs/glitches/theft that occur on the Artists side of things but if you don't MMF has done it all, from lying about The_51's kic...
2023-06-12 21:32:44 +0000 UTC View Post
Worked through the Odo legs, working on some rifle bits for the Koi/Mako~ I've got 2 or 3 more barrels planned, and they're split into two pieces for the held poses, and then they'll be some loose ones like all the other rifle iterations~ After that I'm getting into some larger scale CardinalFish Halos~
Any piece that I edit from the base files will be included in the associated parts folder. So with the Odo, I had to modify the Mako/koi torso to better fit the pose of the hip. The goa...
So this month is gonna be a lot of just bits I've wanted to do for a while now, but either couldn't get to or didn't have a real reason to actually model them out. It's gonna be some kitbash, some modeling, lots of bits, and I think it'll be pretty fun~
And I figured you'd like to see this lil' leader guy~
While I don't typically like making leader models because there's enough bits around for folks to kinda, build their own unique one, I wanted to start off with something that was ...
[Edit 6.6.23 PrePlates for the Geist are up on CG&T and that's a wrap~
~Pipes]
What was originally planned to just be a shoulder update like with the Sturgeon Frame turned into what was basically a complete remodel of the original AnglerGeist frame. Sometimes that's just what happens when you open up a model from 2021 and you're hit with "Wow some of that's just...could be better..."
I wanted to keep elements of the original Geist and silverfish in the design while bring...