Ankh Dock
Added 2025-06-02 17:38:33 +0000 UTCAnkh Phone Wall Holder – 3D Printable
This is a stylish and functional phone holder designed to hang directly on a wall outlet using the phone’s charging cable and adapter. The holder is shaped like the iconic Ankh – the Egyptian symbol of life, bringing a unique aesthetic to your space while keeping your device secure during charging.
Perfect for keeping your phone elevated and safe from spills, cluttered desks, or messy counters.
🛠️ No screws or adhesives required – just place it between the charger and the wall socket.
⚡ Compatible with most standard phone sizes and charging adapters.
🧿 Adds a decorative touch to your room with a spiritual and elegant symbol.
Patreon:
https://www.patreon.com/printmania3d
📄 Recommended Print Settings (FDM)
This model is optimized for standard FDM 3D printers.
- Nozzle diameter: 0.4 mm
- Layer height: 0.2 mm
- Recommended materials: PLA, PETG, or similar
- Nozzle temperature: according to your filament (e.g., PLA: 200 °C)
- Bed temperature: according to your filament (e.g., PLA: 60 °C)
- Print speed: standard (50–60 mm/s recommended)
- Supports: not required*
- Bed adhesion: Brim or Skirt recommended
📐 Final size after print: 210.51 x 249.13 x 86.48 mm
🧩 The model is split into parts to fit build volumes of 220 x 220 x 250 mm or larger.
Note: The model was tested using standard slicer settings in Orca Slicer, printed on a Bambu Lab A1* at the default print speeds of the machine. Settings may be adjusted to match your printer and filament. Always check the slicer preview before printing.
Ankh Dock
