ZOU GHOST

I got this file last year and lost my copy. How do I get it again?

Don't worry, I'll send you a message

zou 3d

I was a member when this was available but lost the files. I resubbed but can no longer download :(

Richard

Hey! I'll send you a message!

zou 3d

My ghost file got corrupted, i came back to re-download and its not available anymore? :(

I love this. I tried printing and found this model to be very clean, smooth and cute.

anyone else having issues getting him to stand and keeping his legs from going back up?

Brad Webb

Thank you! I love all your designs. The ghost is my favorite. I will try the suggestions

Danielle Ruiz

Hello! I use the Gyroid infill (It fills the inner folders better), 4 walls and 20% infill for the keychain, some filaments have different strength (moisture can cause this), reducing speed can also make the dent between the layers stronger

zou 3d

Any suggestions for strengthening the legs? It prints beautiful, removes from the plate perfectly but right at the "sock" line it's very weak and the slightest fall and they snap, I've broken several finished products, including the candy corns. TIA.

Danielle Ruiz

I printed at 100% and saw the shift right above the eyes.

Jacob Edlund

Thank you

jason martinez

i do mine on 0.24mm 10% infill but i increase the size by 5% they look and work great

William Hargraves

ive done them at .2 and they are fine

Ben Buckley

was it with the right leg? I first had a notification in cura, but ignored it and it has been ok for me so far. I did notice the right leg was weaker and I had one break after printing

Print3dReality

what resolution would be good for the key chains .15?

jason martinez

I had the same problem with the file from here in ideaMaker. Ran the slicer's repair, then it printed fine.

I've been trying to get a resin version to work but I can't get the legs to free. How much x,y compensation are y'all using. I printed at 150% and 102% comp.

I’m printing at 300% with a 20% infill, I keep getting layer shift half way through the eyes- any advice how to stop it? Thanks

Up to 150% I use 0% infill. On the keychain I use 20% infill because carriers don't take care of the packages 🤣

zou 3d

Thank you very much for letting us know, this error is very strange

zou 3d

How much infill should i use for 100% and 150%?

I printed it in 10cm Height. Took Like 5,5 hours.. Looks perfect. Anybody has some ideas to Print it faster?

I just finished a clear blue on in resin. Turned out great. Printed flat on the build plate. Didn't size it up or anything. Sidenote I need a flex plate for this Saturn 2.....smh.

I’m getting reports from a lot of people on a Facebook page. That say the cults file is messed up. The legs keep breaking for them. I have not had issues. But one mentioned they had to repair the stl file. Section of leg was missing

Print3dReality

They came out perfect in resin. My wife got me do the keychain and it's definitely strong enough

Kel Puge

I saw a person on Tiktok who did this I don't know how he did it, I'm still improving my resin skills to become an expert

zou 3d

Has anybody printed these in resin? if so, how did it go?

Jen Galli