Making The Motion Work And Hands
Added 2016-03-29 23:52:50 +0000 UTCI think this one is the longest videos I've ever made!
Enjoy :)
Comments
We've all seen you can build a bloody amazing clock with polished brass and everything square.. I'd love to see you throw something (functional) together from whatever junk you find laying around, not caring about crossing out wheels, not caring about alignment and bluing, and just do it "raw" Like made from old rusty steel plate from the former sovjet union or something
Ivar Ryding
2016-04-25 21:09:01 +0000 UTCHey Kenneth, so that it can be gently squeezed and create a light friction fir on the center arbor. Cheers,
Clickspring
2016-04-06 04:57:43 +0000 UTCWhat's the purpose for milling out the middle section of the minute pipe?
Kenneth Klose
2016-04-06 04:25:52 +0000 UTCEasier, but I wouldn't say easy. Crossing out is definitely the most time consuming part, and yes a rotary table can be used to speed up the process, but it's not without its own time consuming issues. The cut left from an small end mill is too unfinished to be acceptable as the final surface, so there is still no avoiding those final finishing steps to get the work to the required standard, but it will give a more accurately dimensioned surface on which to begin that process. Forming the square corners is the bulk of the work, and that remains unavoidable even with the help of a rotary table, so for me a rotab would maybe speed things up, but not by much . Cheers Paul :)
Clickspring
2016-04-02 20:25:29 +0000 UTCAnother amazing video. With the wheel crossing. If you didn't want crisp corners would it not be easy to use the mill and cut right to the line. Using a rotary table to match the gear curve. Seem like the crossing takes the longest out of the whole gear making process.
Paul Busby
2016-04-02 16:52:43 +0000 UTCThanks very much for the encouragement Al, I appreciate it :)
Clickspring
2016-04-01 11:00:22 +0000 UTCCheers Johnno :)
Clickspring
2016-04-01 10:59:46 +0000 UTCClear, precise and well explained - as usual! Wonderful video of beautiful work. If you are doing this class of work after only 4 years, I can't wait to see whats coming!
Al McKague
2016-04-01 10:52:00 +0000 UTCHi Chris, great video as usual. Had a chuckle about how you describe taking a part from being covered in milling marks to a mirror finish as "a quick clean up". Looking forward to the next one...
Johnno Dee
2016-03-31 20:57:43 +0000 UTCHa ha! Nice try Ruben :)
Clickspring
2016-03-31 06:14:32 +0000 UTCHi Chris, was watching the ocean break over the rocks when i saw you had a new vid. Wife complained and ended up wathing with me! :-) awesome as usual very glad glad that you are persisting in completing the clock! It looks stunning! It is my birthday soon, so i will send you my adress. Very well done! Ruben
Ruben vd Merwe
2016-03-31 05:55:46 +0000 UTCHey Tom, yes they're clockmakers spade drill bits. Perfect for small well located holes, nice and stiff, although they need frequent chip clearing due no spiral flutes. I got this set from ottofrei.com, but they don't seem to carry them any more. It's getting harder and harder to find the traditional clock/watch maker tools, whenever I see one I know I need, I buy multiples because I know its probably going to disappear!
Clickspring
2016-03-30 22:56:41 +0000 UTCTo piggyback off this comment, because I can't seem to reply to Chris' response, what sort of bit is that used in the pin vice just after the punching to deepen the divot a little? It looks like some sort of spade-like bit, but I've never seen anything quite like it, and it's cropped up here a few times.
Sheeble
2016-03-30 22:45:43 +0000 UTCI'm glad you liked that little tailstock runner! That's a top John Wilding idea that's a quick and easy substitute for a full scale Jacot Tool. It's so useful and effective. Re the files, yes the main difference is really just size, the escapement files are approx 1/2 size of needle files. Cheers mate :)
Clickspring
2016-03-30 22:29:21 +0000 UTCThank you Chris! Had to watch it twice to get all the flavor out of it, and thanks for the squeak! Your Superb editing, angles, close-ups and lighting, always blow me a way. So many tools of interest in this one. The tail stock holder was quite cool to let you finish off the end of the shaft. Needed something like that recently for turning 25tpi threads on a .098 rod. Binked 2 (Doh!) before I let it go. Thought of drilling some brass RB, slip fit and chucking it in the tail stock but couldn't get enough depth and still get the threading tool in there. May have to try that notch idea and give it another go. If I may ask what is the difference between escapement files and needle files? Ever so nice to see it running!!! Very Best wishes to you. ~PJ
PJ
2016-03-30 21:57:11 +0000 UTCThank you Mike, great to have your support :)
Clickspring
2016-03-30 19:11:46 +0000 UTCThanks very much Rob, really appreciate the kind words :)
Clickspring
2016-03-30 19:10:57 +0000 UTCLonger than I care to admit! Cheers Dan :)
Clickspring
2016-03-30 19:10:27 +0000 UTCSo how long did you spend just sitting there watching the motion?
Dan Cowsill
2016-03-30 18:41:52 +0000 UTCFantastic work, as usual, Chris. Truly inspiring to see it all coming together. Your precision around the finish of the parts is excellent, I hope I can do as well once I get started on my projects
Rob C
2016-03-30 11:57:56 +0000 UTCThat looks amazing! I was thinking the exact same thing as Tom. Thanks for the video!
Mike Michelizzi
2016-03-30 10:00:31 +0000 UTCHa ha! But at least the hour hand is keeping up! Cheers Paul :)
Clickspring
2016-03-30 08:29:18 +0000 UTCWow. All this work only to discover that your minute hand is running a few hundred times too fast. You must be absolutely devastated.
Paul Grodt
2016-03-30 08:02:22 +0000 UTCCheers Jonas :)
Clickspring
2016-03-30 07:34:59 +0000 UTCAnother fantastic video Chris - very professional and educational. Thanks again
Jonas Jalling
2016-03-30 07:04:13 +0000 UTCHey John, I must admit to a little scriber abuse there! Its a terrific little carbide scriber, but I tend to use it a as prick punch on brass because it has such a terrific little point. I got it from here, but they don't seem to carry it any more: <a href="http://jewellerssupplies.com.au/advanced_search_result.php?keywords=scriber" rel="nofollow noopener" target="_blank">http://jewellerssupplies.com.au/advanced_search_result.php?keywords=scriber</a> I had intended to still do the occasional video for Make: but I would be interested what the issue are that you mention, maybe PM me? Thrilled you're enjoying the videos mate, and very much appreciate your ongoing support :)
Clickspring
2016-03-30 06:30:57 +0000 UTCAbout 13 minutes in, you use a very cool looking centre punch. Did you make that, or is it a known brand? Also, are you still doing videos for Make? I heard they had some issues recently. Lastly, just want to say again how much I enjoy your work.
John Creasey
2016-03-30 06:20:55 +0000 UTCHa ha! Cheers Matt :)
Clickspring
2016-03-30 02:46:40 +0000 UTCI seriously considered skipping work so I could watch this, haha.
Matt Syme
2016-03-30 02:27:40 +0000 UTCYes its awesome to finally be able to shoot a photo of the thing that looks like it will when finished - providing I keep the missing escapement and pendulum out of the shot! Cheers Tom :)
Clickspring
2016-03-30 02:00:57 +0000 UTClongest video = most content to enjoy! another great episode. it must feel great to see the motion work actually in motion...
Tom Colson
2016-03-30 01:41:48 +0000 UTCPlenty of constructive criticism, but nothing truly horrible no - lets not ask for trouble tho! Great to have your support Kevin :)
Clickspring
2016-03-30 01:36:26 +0000 UTCJust curious have you ever got a negative comment............just awesome talent great videos.
kevin todd
2016-03-30 01:16:42 +0000 UTCHey Jonathan, the clock is a design by well known UK clockmaker John Wilding, based on the classic "Y frame" design that was very popular in continental Europe around the 18th century. It is a fairly faithful representation of that tradition, except for the austere nature of the build - the classic pieces from that period were truly over the top elaborate affairs, so additions like the bezel are my attempt to move the design a little closer to the traditional examples. I've got another addition to make, but its high risk given that I've left it towards the end of the build, so I'm still deciding if I have the nerve to do it :)
Clickspring
2016-03-30 00:59:27 +0000 UTCReally incredible how much the hands change the look of this clock in progress! You've mentioned a few times how you're modifying plans for the clock - are they your own? Or are you working out of another clockmaker's book? Many thanks!
asterisk.jpg
2016-03-30 00:52:24 +0000 UTCGreat to have your support Isaac :) The next thing I want to get moving along is the Patron Series project, so I will be back on that all of next weekend. The next clock episode will follow that :)
Clickspring
2016-03-30 00:34:48 +0000 UTCI can't get enough of your videos. I'm fairly certain I've seen at least half of them twice. Thank you for all the effort you put into these. I hate to get greedy, but any idea on when the next episode will be out? ;)
Isaac Smith
2016-03-30 00:30:50 +0000 UTCHa ha! I've got you covered Richard! The next long term project to follow this one is in development now, and promises to be a fun one :) 5 more episodes to go on this one as you suggest: pendulum, escapement, stop work, winding key/polish/assembly and another modification to the design that I'm still building up the courage to do...
Clickspring
2016-03-30 00:22:07 +0000 UTCThis video brings up a new fear: there's not too much left to this clock! (I can only think of the pendulum and the escapement... so maybe 4 videos?) What am I going to slavishly watch once you're done, Chris?!?
Richard Betel
2016-03-30 00:18:43 +0000 UTCThank you Dan, very much appreciate your support :)
Clickspring
2016-03-30 00:18:27 +0000 UTCA true delight to watch. Your efforts are greatly appreciated.
Dan Priest
2016-03-30 00:15:51 +0000 UTCIt isn't actually, it is here: <a href="https://www.westdean.org.uk/study/short-courses/courses/4d6014-an-introduction-to-clock-making" rel="nofollow noopener" target="_blank">https://www.westdean.org.uk/study/short-courses/courses/4d6014-an-introduction-to-clock-making</a> I'm not sure if the BHI organise anything like it, I would love it if they did! By the way, it's a fantastic course and would really recommend for anyone interested in getting some hands on experience,
Bart Jennings
2016-03-30 00:06:04 +0000 UTCAwesome Bart, is that with the BHI?
Clickspring
2016-03-30 00:03:01 +0000 UTCJust about to get stuck in Chris! Looks great, I always look forward to seeing everything you post. You inspired me, and I'm currently on a one week "Introduction to Clock Making" course which I'm REALLY enjoying! Best wishes from UK
Bart Jennings
2016-03-29 23:58:25 +0000 UTC
