Floor tile STL magnetisation guide
Added 2024-04-12 15:05:23 +0000 UTCHi guys,
Just the magnetisation guide for the floor tiles, including some thoughts on crafting these from foam if you were so inclined :)
Comments
The interior walls were an stl release in a previous month, they'll come back as a throwback when they cycle around, or you can pick them up on myminifactory, after 3 months patrons get a 50% discount on old releases :)
PensiveBadger
2024-05-06 06:18:47 +0000 UTCI’m so confused, is there stls of this stuff https://www.patreon.com/posts/55873370?utm_campaign=postshare_fan
Isaac Mills
2024-05-06 05:45:35 +0000 UTCOurs are supported carefully to avoid warping when printing, we basically compensated
PensiveBadger
2024-04-15 07:18:21 +0000 UTCI've been doing effectively this already for my builds, but without the lip in the topper, instead I put an inset on the top of the bottom piece. My one question for you is do you find the top thin piece warping during curing at all? Mine warp quite a bit and cause me to need to glue and clamp the top pieces down in order to fix. I've also had to upgrade the magnet sizes in order to lock more securely with the added weight. The bottom I print in fdm for greater strength, no warping and cheaper for the bulk piece that doesn't need the detail of resins like the top.
SteveWasEre
2024-04-14 22:53:24 +0000 UTCThey were the release for sept/October last year, they'll come back with the throwbacks when they cycle round, or you can get them with the 3 month patron discount on mmf (or without, if you really wanted to) :)
PensiveBadger
2024-04-13 23:08:37 +0000 UTChow do you get the stls for these tiles?
Kyle Williams
2024-04-13 21:47:40 +0000 UTC
